Value Collection SVY2-5-HD Fork Terminal 10 Stud 600V

Product Description

The VALUE COLLECTION SVY2-5-HD is a partially insulated, standard fork terminal designed for secure wire-to-stud connections in electrical panel work, control wiring, and field terminations. The blue vinyl insulation sleeve identifies compatibility with 1.5 to 2.5 sq mm wire and provides partial coverage at the barrel entry point. Rated at 600 volts, this copper-contact terminal accepts a No. 10 stud (5.30 mm) and delivers a fork width of 9.00 mm, making it suitable for ring-lug-style termination points where the stud does not need to be fully removed during installation.

This terminal is used in residential and light commercial electrical work, HVAC control circuit terminations, and industrial panel wiring where 1.5 to 2.5 sq mm conductors are routed to grounding bars, terminal strips, or equipment studs. The partially insulated design allows the conductor barrel to be crimped cleanly while keeping the fork tine area open for stud contact. Electricians and HVAC controls technicians commonly use this style of terminal in low-voltage and line-voltage control wiring applications.

Key Features

• Partially insulated blue vinyl sleeve for 1.5 to 2.5 sq mm wire identification and grip
• Copper contact material for reliable conductivity at stud termination points
• Rated 600 volts for use across a broad range of control and power wiring applications
• Accepts No. 10 stud with a 5.30 mm stud size and 9.00 mm fork width
• Overall length of 1.004 inches and barrel thickness of 0.051 inches for compact panel routing

Compatibility

Designed for use with 1.5 to 2.5 sq mm stranded or solid copper conductors and No. 10 stud hardware in standard electrical and control panel termination applications.

Installation Notes

Installation is performed by licensed electricians or qualified HVAC technicians. De-energize all circuits before terminating wires at any stud or terminal strip. Use a calibrated ratcheting crimping tool sized for the wire gauge range to achieve a gas-tight crimp on the barrel. Verify torque requirements for the stud fastener per the equipment manufacturer specifications and applicable NEC guidelines before tightening.