Value Collection SM0501900 Chucking Reamer 19mm Hss

Product Description

The VALUE COLLECTION SM0501900 is a straight-flute chucking reamer designed for precision hole finishing in metalworking applications. Ground to a 19.00mm (0.7480 inch) diameter, this reamer removes minimal stock to bring a drilled or bored hole to a tight, accurate final size. Constructed from high-speed steel (HSS) with a bright, uncoated finish, it is suited for use on a wide range of ferrous and non-ferrous workpiece materials. The straight-cylindrical shank seats securely in standard drill chucks or collet holders. A right-hand cutting direction makes it compatible with conventional spindle rotation on lathes, drill presses, and CNC machining centers.

This reamer is intended for machine-fed applications where hole diameter tolerance and surface finish are critical. With an overall length of 9 inches and a flute length of 2.25 inches, it handles typical through-hole and shallow blind-hole reaming tasks in production and job-shop environments. Machinists, tool-and-die makers, and maintenance technicians reach for chucking reamers when a drilled hole must meet a precise fit class for pins, bushings, bearings, or dowel installations.

Key Features

• 19.00mm (0.7480 inch) finished diameter for accurate hole sizing
• HSS construction provides toughness and resharpening capability
• Bright, uncoated finish suitable for general-purpose reaming operations
• Straight flute geometry works well in through-hole and most blind-hole applications
• Straight-cylindrical shank for reliable grip in standard chucks and collets
• Right-hand cutting direction compatible with conventional machine spindle rotation

Compatibility

Designed as a machine-fed chucking reamer for use in lathes, drill presses, mill-drill machines, and CNC machining centers equipped with standard drill chucks or collet systems that accept a straight-cylindrical shank.

Installation Notes

A licensed machinist or trained toolroom technician should set up and operate this reamer. Power down and lock out the machine spindle before installing or removing the reamer from the chuck or collet. Always feed at a controlled, consistent rate and apply cutting fluid appropriate to the workpiece material to protect the cutting edges and achieve the target surface finish. Do not reverse spindle rotation while the reamer is engaged in the workpiece.