Value Collection SM0500700 Chucking Reamer 7.00mm Hss

Product Description

The VALUE COLLECTION SM0500700 is a straight-flute chucking reamer designed to bring bored or drilled holes to a precise finished diameter of 7.00mm (0.2756 inches). Manufactured from high-speed steel (HSS) with a bright, uncoated finish, it delivers clean, accurate results in a wide range of common shop materials. The straight-cylindrical shank seats securely in standard drill chucks or collet holders, making setup straightforward. With 4 right-hand cutting flutes and a 1-1/2 inch flute length, the tool removes minimal stock while producing smooth, consistent hole walls. Machinists and toolroom technicians use this reamer as a reliable finishing tool in both manual and CNC drilling operations.

This reamer is suited for finishing through-holes and blind bores in ferrous and non-ferrous workpieces where tight diameter tolerances are required. At 6 inches overall length, it provides adequate reach for typical machine shop fixtures and vise setups. The right-hand cutting direction works with standard spindle rotation. It is intended for use in drill presses, lathes, and machining centers equipped with a compatible chuck or collet. This tool is not configured as a dowel-pin reamer or as an over/under-size reamer, so it is appropriate for standard nominal-diameter finishing applications.

Key Features

• 7.00mm (0.2756 inch) finished hole diameter for precise tolerance work
• High-speed steel (HSS) construction provides durability across a range of workpiece materials
• 4 straight flutes with right-hand cutting direction for smooth, consistent finish
• Bright uncoated finish — ready to use without additional prep
• Straight-cylindrical shank compatible with standard drill chucks and collet holders
• 6 inch overall length with 1-1/2 inch flute length for typical machine shop applications

Compatibility

Designed as a standard-tolerance chucking reamer for use in drill presses, lathes, and machining centers that accept a straight-cylindrical shank via chuck or collet. No specific OEM machine compatibility was stated by the manufacturer for this item.

Installation Notes

Chucking reamers are installed by machinists using a drill chuck or collet that matches the shank diameter — confirm shank fit before mounting. Always power down and lock out the machine spindle before changing tooling. Reamers are a finishing tool and require a pre-drilled or bored hole that is already close to final diameter; attempting to remove excess stock risks tool breakage and poor surface finish. Use appropriate cutting fluid for the workpiece material to extend tool life and improve hole quality.