Value Collection SM0402230 Chucking Reamer 0.2230 in Hss

Product Description

The VALUE COLLECTION SM0402230 is a 4-flute, straight-flute chucking reamer designed to finish-ream drilled or bored holes to a precise 0.2230-inch diameter. Constructed from high-speed steel (HSS) with a bright, uncoated finish, it delivers accurate sizing and smooth surface finish in a wide range of metals and softer engineering materials. The straight-cylindrical shank seats directly in drill chucks, collets, or floating holders, making it a practical choice for machine shop, maintenance, and production environments where hole tolerance and surface quality matter.

This reamer is suited for use in machining centers, drill presses, lathes, and hand-held power tools equipped with appropriate holding devices. It is commonly applied in light production runs, tool and die work, and maintenance repair operations where final hole sizing to 0.2230 inches is required. Right-hand cutting direction matches standard rotating-spindle setups. The 0.2230-inch diameter falls within the 0.2000- to 0.2499-inch decimal inch range, making it appropriate for pin, dowel, and precision fastener hole finishing where close tolerances are critical.

Key Features

• 0.2230-inch finished hole diameter for precise, repeatable sizing
• HSS tool material provides toughness and wear resistance across common workpiece materials
• 4 straight flutes for smooth cutting action and easy chip clearance
• Bright, uncoated finish — ready to use out of the box with appropriate cutting fluid
• Straight-cylindrical shank compatible with standard drill chucks and collet holders
• Right-hand cutting direction for use with standard forward-rotating spindles

Compatibility

Designed as an OEM-style chucking reamer for use in standard drill chucks, collets, and floating reamer holders on drill presses, lathes, and machining centers configured for straight-cylindrical shank tooling.

Installation Notes

This reamer is installed and operated by machinists and tool and die technicians. Secure the straight-cylindrical shank firmly in a true-running chuck or collet before use, and verify runout before beginning the cut. Always apply a suitable cutting fluid for the workpiece material to extend tool life and improve surface finish. Pre-drill or bore the hole to the appropriate undersize before reaming — do not use a reamer to remove excess stock.