Value Collection S04065249 Wheel Brush 4 in Crimped

Product Description

The VALUE COLLECTION S04065249 is a 4-inch diameter crimped wire wheel brush designed for surface preparation, deburring, cleaning, and rust or scale removal on metal workpieces. It mounts via a 1/4-inch diameter shank, making it compatible with standard die grinders, drill presses, and portable drills. The fill material is brass-coated steel wire with a filament diameter in the 0.0100 to 0.0199 inch range, delivering moderate aggression suited for general-purpose metal finishing without excessive material removal. The brush is rated to a maximum of 4,500 RPM. Installation and operation are performed by machinists, fabricators, maintenance technicians, and general metalworkers.

This wheel brush is used in light industrial, maintenance, and fabrication environments where controlled surface conditioning is required. Typical applications include weld cleanup, paint and coating removal, corrosion removal, and edge blending on ferrous and non-ferrous metals. The brass-coated steel wire provides a degree of rust resistance on the fill material itself. With a 7/8-inch trim length and a 15/32-inch face width, the brush maintains consistent contact across narrow surfaces and contoured edges. The included 1/4-inch shank with a 30 mm shank length fits the majority of standard rotary tool collets.

Key Features

• 4-inch outside diameter with a 15/32-inch face width for focused surface contact
• Crimped brass-coated steel wire construction for general-purpose metal cleaning and deburring
• 1/4-inch diameter shank included, 30 mm shank length, fits standard rotary tool collets
• Rated to 4,500 RPM maximum operating speed
• 7/8-inch trim length provides flexibility and consistent wire contact pressure
• Filament wire diameter in the 0.0100 to 0.0199 inch range for moderate aggression

Compatibility

Designed for use with standard 1/4-inch collet die grinders, bench-mounted drill presses, and handheld portable drills accepting a 1/4-inch shank accessory.

Installation Notes

A licensed or experienced metalworker or maintenance technician should install and operate this brush. Always power down and disconnect the tool from its power source before mounting or removing the brush. Secure the shank fully into the collet or chuck and verify the tool RPM rating meets or exceeds the 4,500 RPM maximum before operation. Eye protection and appropriate PPE are required during use, as wire bristles can shed at speed.