Value Collection S04065082 Wheel Brush 4 in Crimped

Product Description

The VALUE COLLECTION S04065082 is a 4-inch diameter wheel brush designed for deburring, cleaning, and surface preparation on metal and other hard materials. It mounts via a 1/2-inch arbor hole and uses crimped brass-coated steel wire filaments with a diameter range of 0.0100 to 0.0199 inches. The crimped wire construction provides consistent contact pressure across irregular or contoured surfaces. Rated to 4,500 RPM, this brush is suited for use on bench grinders, arbor presses, and compatible rotary tools. No shank is included. The brush is not encapsulated, and has a 7/8-inch trim length and a 1/2-inch face width.

This wheel brush is a general-purpose abrasive tool used in maintenance, fabrication, and finishing operations. Typical applications include rust and scale removal, weld spatter cleanup, paint stripping, and light deburring on ferrous and non-ferrous metals. It is commonly used in industrial shops, plumbing and HVAC fabrication environments, and mechanical maintenance settings where a powered rotary brush is required for surface conditioning work.

Key Features

• 4-inch outside diameter with 1/2-inch arbor hole for standard bench grinder and arbor tool fitment
• Crimped brass-coated steel wire provides flexible, consistent contact on uneven surfaces
• Wire filament diameter range of 0.0100 to 0.0199 inches for medium-duty wire density
• Maximum rated speed of 4,500 RPM
• 7/8-inch trim length and 1/2-inch face width for controlled brushing action
• No shank included — mounts directly via arbor hole

Compatibility

Designed for use with bench grinders, arbor-mounted rotary tools, and similar equipment that accepts a 1/2-inch arbor hole wheel brush up to 4,500 RPM.

Installation Notes

Always power down and disconnect the grinder or rotary tool before mounting or removing the brush. Verify that the tool spindle speed does not exceed the 4,500 RPM maximum rating of this brush before operation. Ensure the arbor nut and flanges are properly secured before running the tool. Eye protection and appropriate PPE should be worn during operation per standard shop safety practice.