Value Collection S04064812 Wheel Brush 8 in Crimped

Product Description

The VALUE COLLECTION S04064812 is a crimped wire wheel brush designed for surface preparation, deburring, and cleaning applications in industrial and shop environments. The brush measures 8 inches in outside diameter with a 1-inch face width and mounts via a 1-1/4 inch arbor hole. Fill material is brass-coated steel wire with a filament diameter in the 0.0100 to 0.0199 inch range. Maximum rated speed is 4,500 RPM. The trim length is 1-11/32 inches. Installation and operation are handled by machinists, fabricators, and maintenance technicians using compatible bench grinders or arbor-mounted equipment.

This wheel brush suits metal fabrication shops, maintenance facilities, and industrial production environments where consistent surface conditioning is required. Common tasks include rust and scale removal, weld spatter cleanup, and general surface finishing on ferrous and non-ferrous metal workpieces. The crimped wire configuration provides moderate aggressiveness suitable for finishing and cleaning without heavy stock removal. No shank is included; the brush requires an arbor-mount setup sized for a 1-1/4 inch hole.

Key Features

• 8 inch outside diameter with 1 inch face width for broad surface contact
• Crimped brass-coated steel wire fill for moderate-duty cleaning and finishing
• 1-1/4 inch arbor hole for secure arbor-mount installation
• Rated to 4,500 RPM maximum operating speed
• Filament wire diameter range of 0.0100 to 0.0199 inches for controlled aggressiveness
• 1-11/32 inch trim length for consistent wire engagement across the workpiece

Compatibility

Designed for use with bench grinders and arbor-mounted equipment accepting a 1-1/4 inch arbor hole. Verify spindle speed does not exceed the 4,500 RPM maximum rating before installation.

Installation Notes

A licensed or experienced machinist or shop technician should install this brush following the equipment manufacturer's arbor mounting instructions. Power down and lock out the grinder or arbor spindle before mounting or removing the brush. Confirm the machine spindle speed does not exceed the 4,500 RPM maximum rated speed of the brush. Eye protection and appropriate PPE are required during operation per applicable ANSI and OSHA standards.