Value Collection S04064739 Wheel Brush 4 Inch Arbor

Product Description

The VALUE COLLECTION S04064739 is a 4-inch diameter wheel brush designed for surface preparation, deburring, and cleaning applications in metalworking and fabrication environments. It mounts via a 3/4-inch arbor hole and features crimped brass-coated steel wire fill material, which delivers consistent abrasive action across ferrous and non-ferrous surfaces. The brush is rated to a maximum of 8,000 RPM, making it compatible with standard bench grinders and right-angle grinders when paired with the appropriate arbor hardware. No shank is included. This type of brush is typically installed and operated by machinists, fabricators, maintenance technicians, and metalworking tradespeople.

This wheel brush is suited for bench grinder or arbor-mounted power tool use in industrial maintenance, light fabrication, and metal finishing tasks. The crimped wire configuration provides moderate aggressiveness, appropriate for removing rust, scale, paint, and weld spatter from steel and similar substrates. With a 3/4-inch face width and an 11/16-inch trim length, it offers good contact surface area for edge work and flat surface passes. It is a single-piece, non-encapsulated brush intended for general shop use.

Key Features

• 4-inch outside diameter suits standard bench grinder wheel positions
• Crimped brass-coated steel wire for moderate abrasive action on metal surfaces
• 3/4-inch arbor hole fits common arbor-mount grinder configurations
• 8,000 RPM maximum speed rating for safe operation on compatible power tools
• 11/16-inch trim length provides stable wire projection and consistent contact
• Non-encapsulated, no-shank design for direct arbor mounting

Compatibility

Designed for use with bench grinders and arbor-mounted power tools that accept a 3/4-inch arbor hole and operate at or below 8,000 RPM. Arbor hardware is not included and must be sourced separately to match the specific tool configuration.

Installation Notes

Installation should be performed by a qualified operator familiar with rotating abrasive tool safety. Power down and disconnect the grinder from its power source before mounting or removing the brush. Verify the tool spindle speed does not exceed the 8,000 RPM maximum rating marked on the brush. Always use the appropriate arbor flanges and follow ANSI B11 or tool manufacturer guidelines for wheel mounting and guarding.