Value Collection S00652016 Knotted Wheel Brush 7 in

Product Description

The VALUE COLLECTION S00652016 is a knotted wheel brush designed for aggressive surface preparation, deburring, cleaning, and rust or scale removal on metal workpieces. The brush mounts via a 7/8 inch arbor hole and is rated to a maximum of 9,000 RPM, making it suitable for use with bench grinders and angle grinders operating within that speed range. The 7 inch outside diameter and 1/2 inch face width deliver focused contact on flat and contoured surfaces. Steel fill wire in the 0.0100 to 0.0199 inch filament diameter range provides the stiffness needed for heavy-duty cleaning and paint stripping tasks encountered in fabrication and maintenance work.

This wheel brush is well suited for metal fabrication shops, industrial maintenance facilities, and trade environments where weld spatter removal, surface conditioning, and pre-weld cleaning are routine tasks. The knotted wire configuration delivers more aggressive cutting action than crimped wire, making it the preferred choice when working with heavier scale, corrosion, or weld flash. No shank is included; the arbor hole mount requires a compatible arbor or adapter sized to 7/8 inch. The brush is not encapsulated, which allows full wire flex across the 1-11/16 inch trim length.

Key Features

• Knotted steel wire fill for aggressive deburring, rust removal, and weld cleaning
• 7 inch outside diameter with 1/2 inch face width for broad contact coverage
• 9,000 RPM maximum speed rating compatible with standard bench and angle grinders
• 7/8 inch arbor hole mount for secure, centered seating on the spindle
• Filament wire diameter range of 0.0100 to 0.0199 inch for a balance of aggression and flex
• 1-11/16 inch trim length provides consistent wire projection throughout tool life

Compatibility

Designed for use on bench grinders and angle grinders equipped with a 7/8 inch arbor; verify that the tool's rated no-load speed does not exceed the 9,000 RPM maximum rating of this brush before mounting.

Installation Notes

Installation should be performed by a qualified operator familiar with abrasive wheel safety practices. Always confirm the grinder's rated speed does not exceed the 9,000 RPM maximum marked on the brush before mounting. Power down and lock out the grinder before seating the brush on the arbor, and ensure the arbor nut is properly tightened before resuming operation. Operators should wear appropriate eye protection, a face shield, and gloves during use, as knotted wire brushes can shed wire fragments at operating speed.