Value Collection RVY5-6-25PK Ring Terminal 12-10 Awg 25PK

Product Description

The VALUE COLLECTION RVY5-6-25PK is a partially insulated circular ring terminal designed for secure crimp connections on 12 to 10 AWG copper conductors. The terminal body is copper with a yellow vinyl insulation sleeve, sized to fit a 1/4-inch stud. Overall length measures 1.161 inches and ring width measures 0.472 inches, making it a compact, standard-profile ring lug suited for panel wiring, grounding points, and equipment terminations. Electricians and wiring technicians use these terminals where a reliable mechanical and electrical connection is required at a screw or stud termination point. This listing is sold as a pack of 25.

This ring terminal is appropriate for residential, commercial, and light industrial wiring applications where 12 or 10 AWG conductors must be terminated at a fixed stud or binding post. Typical installations include control panels, junction boxes, motor leads, and equipment grounding circuits. The partially insulated design provides strain relief at the barrel entry while leaving the ring tongue exposed for full metal-to-metal contact at the mounting point. Wire range compatibility of 4.00 to 6.00 sq mm aligns with standard 12-to-10 AWG conductor sizing.

Key Features

• Copper contact material provides reliable conductivity at the stud connection
• Yellow vinyl partial insulation covers the barrel and wire entry for strain relief and polarity identification
• Crimp connection type for fast, consistent termination without solder
• Fits 1/4-inch (6.40 mm) stud diameter
• cUL Listed and UL Listed; RoHS Compliant
• Pack of 25 terminals for production or service use

Compatibility

Designed for use with 12 to 10 AWG (4.00 to 6.00 sq mm) copper conductors and 1/4-inch stud hardware in standard ring-terminal applications.

Installation Notes

Installation should be performed by a qualified electrician in accordance with applicable NEC requirements. De-energize and lock out the circuit before terminating or inspecting connections. Use a calibrated crimp tool rated for the wire gauge and terminal series to ensure a secure, gas-tight crimp. Do not solder over a crimped connection, as this can create a stress point and reduce long-term reliability.