Value Collection RNYB8-10-C Ring Terminal 8 Awg Crimp

Product Description

The VALUE COLLECTION RNYB8-10-C is a partially insulated circular ring terminal designed for crimp connections on 8 AWG copper wire. The terminal body is copper with a red nylon insulation sleeve that partially covers the barrel, providing basic protection at the connection point while keeping the ring lug exposed for fastening. It measures 1.469 inches in overall length and 0.591 inches in ring width, with a stud hole sized for a 3/8-inch fastener. This type of terminal is a standard component in panel wiring, grounding runs, and equipment connections across electrical, HVAC, and industrial service work.

This ring terminal is suited for use in residential and light commercial wiring applications where a secure, low-resistance crimp connection to a stud or screw terminal is required. Typical installations include control panel grounds, equipment bonding lugs, and branch circuit terminations. The 3/8-inch stud size accommodates a wide range of standard lug mounting configurations. Electricians and service technicians use these terminals when terminating 8 AWG wire to bus bars, grounding blocks, or equipment chassis terminals.

Key Features

• Partially insulated design with red nylon sleeve for visual identification of 8 AWG wire gauge
• Copper contact material provides reliable conductivity and corrosion resistance
• Crimp connection type — no soldering required for installation
• 3/8-inch stud hole fits a wide range of standard fastener sizes
• UL Listed and cUL Listed; RoHS Compliant
• Overall length of 1.469 inches and ring width of 0.591 inches for compact termination

Compatibility

Designed for use with 8 AWG wire and 3/8-inch stud terminals; suitable as a standard crimp ring terminal in electrical panel, grounding, and equipment wiring applications.

Installation Notes

Installation should be performed by a qualified electrician in accordance with applicable NEC requirements. De-energize the circuit and verify absence of voltage before terminating any conductor. Use a calibrated ratcheting crimp tool rated for the terminal barrel size to ensure a proper gas-tight crimp; do not use pliers or uncalibrated tools as substitutes. Inspect the insulation sleeve after crimping to confirm it has not cracked or pulled back from the barrel.