Value Collection RNB80-10 Ring Terminal 3/0 Awg Crimp

Product Description

The VALUE COLLECTION RNB80-10 is a non-insulated circular ring terminal designed for crimped electrical connections on 3/0 AWG conductors. Constructed with a copper contact, this terminal provides reliable conductivity in high-current wiring applications. It measures 2.134 inches in overall length and 1.063 inches in ring width, with a stud hole sized for 3/8-inch hardware. The terminal meets UL Listed and cUL Listed standards and is RoHS compliant, making it suitable for use in commercial and industrial electrical work where code-compliance documentation is required.

This ring terminal is used in panel wiring, battery cable terminations, grounding applications, and heavy-gauge conductor connections where a secure mechanical and electrical bond to a stud or busbar is needed. It is appropriate for residential service entrance work, commercial electrical panels, and industrial control wiring involving large-gauge copper conductors. Installation is typically performed by licensed electricians working with large-format wire lugs and hydraulic or ratcheting crimp tools rated for 3/0 AWG.

Key Features

• Non-insulated circular ring terminal for direct inspection of the crimp joint after installation
• Crimp connection type compatible with 3/0 AWG wire (80 sq mm equivalent)
• Copper contact material for high conductivity and corrosion resistance in electrical terminations
• 3/8-inch stud size fits standard busbar and grounding studs
• UL Listed and cUL Listed with RoHS compliance for code-compliant installations
• Overall length of 2.134 inches and ring width of 1.063 inches for consistent fitment in panel and lug applications

Compatibility

Designed as an OEM-style replacement or standard-use ring terminal for crimp-connection applications on 3/0 AWG copper conductors with 3/8-inch stud hardware.

Installation Notes

Installation should be performed by a qualified electrician in accordance with applicable NEC requirements. De-energize and lock out the circuit before terminating any conductors. Use a crimp tool rated for 3/0 AWG to achieve a proper mechanical connection. Non-insulated terminals should be sleeved or covered with appropriate heat shrink or insulating material where bare exposure is not permitted by code.