Value Collection R63266288 Set Screw 10-24 X 1 in

Product Description

The VALUE COLLECTION R63266288 is a 10-24 UNC cup point set screw machined from 18-8 stainless steel. At 1 inch in overall length, it seats with a 3/32-inch hex key drive and locks rotating components against shafts or bores without a protruding head. The cup point bites into the mating surface to resist axial and rotational movement under load. Stainless steel construction resists corrosion in wet, humid, or mildly chemical environments. This fastener is sold in packages of 1, with a minimum order quantity of 100 units, making it suited for shop stock, MRO, and production assembly applications.

Cup point set screws in 10-24 UNC are a standard fastener in light mechanical assemblies, small motor and pulley retention, HVAC blower wheel hubs, and general equipment manufacturing. Installers specify the 18-8 stainless grade when carbon steel would corrode or when FDA or sanitary compliance is a consideration. The 3/32-inch hex drive is compatible with standard T-handle and L-key sets commonly carried by mechanical technicians and assemblers.

Key Features

• 10-24 UNC thread for wide compatibility with standard tapped holes in light assemblies
• Cup point geometry bites into shaft surface to resist torque and axial movement
• 18-8 stainless steel construction resists rust and mild chemical exposure
• 1 inch overall length suits moderate engagement depth requirements
• 3/32-inch hex drive accepts standard L-key and T-handle hex sets
• Headless design sits flush or below surface for clearance-sensitive installations

Compatibility

Designed as a standard 10-24 UNC cup point set screw suitable for use in any tapped hole meeting the 10-24 UNC thread standard at 1 inch nominal depth.

Installation Notes

A licensed or qualified mechanical technician should de-energize and lock out all rotating equipment before installing or removing set screws. Use a properly sized 3/32-inch hex key to avoid rounding the drive socket. Do not over-torque; refer to the equipment manufacturer's fastener specifications for the correct seating torque for 10-24 set screws in the applicable material. Inspect the shaft seating surface for burrs or damage before installation to ensure full cup point engagement.