Value Collection R57900529 Slotted Spring Pin 2mm X 30mm

Product Description

The VALUE COLLECTION R57900529 is a slotted spring pin designed for use in mechanical assemblies where a compressed, resilient fastener is required to secure components in a drilled hole. Manufactured from Grade 1070-1080 steel with a plain finish, this pin measures 2mm in diameter and 30mm in length. The slotted design allows the pin to compress during insertion and exert outward spring force against the hole wall, providing a secure, vibration-resistant fit without additional hardware. It is installed by maintenance technicians and mechanical assemblers working on equipment, machinery, and tooling applications.

This slotted spring pin is suited for light- to medium-duty mechanical assembly work where a standard tolerance hole and a self-retaining fastener are needed. Typical applications include shaft-to-hub connections, pivot points, hinge assemblies, and alignment pins in manufactured components. The plain steel finish makes it appropriate for dry or lightly oiled indoor environments. It is commonly used in industrial maintenance, equipment repair, and production assembly settings.

Key Features

• Slotted design compresses on insertion and exerts radial spring force for a secure, self-retaining fit
• Grade 1070-1080 steel construction provides reliable strength and resilience for mechanical fastening
• Plain finish suitable for dry or lightly oiled indoor assembly applications
• 2mm diameter and 30mm length for precise fitment in standard metric drilled holes
• Lightweight at approximately 0.003 pounds per pin

Compatibility

Designed as a standard metric slotted spring pin for use in mechanical assemblies requiring a 2mm nominal diameter hole. Verify hole diameter tolerance and material hardness requirements before installation.

Installation Notes

Slotted spring pins are installed by pressing or driving into a drilled hole using a pin punch and hammer or an arbor press. Ensure the receiving hole is clean, properly sized to the nominal pin diameter, and free of burrs before installation. Eye protection is required when driving pins. Do not attempt to remove or reinstall a pin that has been fully deformed, as structural integrity may be compromised.