Value Collection PC127NB-2 Brass Street Tee 1/8 in Fnpt Mnpt

Product Description

The VALUE COLLECTION PC127NB-2 is a nickel-plated brass street tee designed for threaded pipe assemblies in plumbing, HVAC, and industrial fluid systems. This fitting connects one female NPT end and one male NPT end in a tee configuration, allowing a branch takeoff directly from a threaded run without requiring a separate nipple. Rated to 1,000 psi, it handles demanding pressure service in compressed air, water, and hydraulic lines. The nickel plating adds corrosion resistance over the brass base material. At 0.07 pounds, it is compact and sized for 1/8-inch pipe thread applications.

This street tee is suited for residential and light commercial installations where a compact, in-line branch connection is needed. Common applications include instrumentation lines, gauge ports, compressed air distribution, and low-volume fluid control circuits. The 1/8-inch fitting size makes it a standard choice for pilot lines, sensing ports, and small-bore service connections in HVAC controls and plumbing rough-in work. Licensed plumbers, pipefitters, and HVAC technicians typically install this fitting during system assembly or service.

Key Features

• 1,000 psi pressure rating suitable for compressed air, water, and fluid service
• FNPT x MNPT end connections allow direct street-tee installation without an additional nipple
• Nickel-plated finish over brass for added corrosion resistance
• 1/8-inch fitting size for small-bore and instrumentation applications
• Compact, lightweight construction at 0.07 pounds

Compatibility

Designed as a standard 1/8-inch NPT street tee for use in threaded pipe systems following ASME B1.20.1 thread standards, compatible with any mating 1/8-inch NPT male or female threaded fitting or pipe end.

Installation Notes

Installation should be performed by a licensed plumber, pipefitter, or qualified HVAC technician in accordance with applicable local codes and the IPC or IFGC where relevant. Depressurize and isolate the line before disassembly or installation. Apply thread sealant or PTFE tape to the male threads before assembly; do not overtighten, as brass fittings can crack under excessive torque. Verify the system pressure does not exceed the 1,000 psi rating of this fitting after returning the line to service.