Value Collection NFC6727 Steel Sleeve Drywall Anchor

Product Description

The VALUE COLLECTION NFC6727 is a steel sleeve-type hollow wall anchor designed for fastening into drywall where there is no stud backing. The anchor body is 0.125 inches in diameter and 1.25 inches in overall length, and it accepts a 5/16-inch screw. A zinc finish provides basic corrosion resistance in typical interior environments. The sleeve expands behind the drywall face as the screw is driven, creating a mechanical grip against the back side of the panel. Electricians, plumbers, HVAC techs, and general contractors use these anchors when mounting brackets, conduit supports, duct hangers, and similar light-duty hardware to drywall surfaces without direct stud access.

This anchor is intended for use in drywall panels ranging from 1.25 inches to 1.75 inches in thickness. It is a standard interior fastener suited for residential and light commercial applications. Typical installations include wall-mounted brackets, cover plates, access panel frames, and utility supports on interior partition walls. The slotted and Phillips drive compatibility allows installation with common hand tools or a power driver. Sold in multiples of 100 units, making it appropriate for contractors stocking fasteners for ongoing jobsite use.

Key Features

• Steel sleeve construction expands on the blind side of the drywall for secure mechanical hold
• Zinc finish provides corrosion resistance for standard interior conditions
• Dual drive type accepts both slotted and Phillips drive tools
• Fits drywall thickness range of 1.25 inches to 1.75 inches
• Accepts a 5/16-inch screw for broad hardware compatibility
• Compact 0.125-inch diameter body minimizes wall surface damage during installation

Compatibility

Designed as an OEM-style replacement anchor for use in standard interior drywall panels between 1.25 inches and 1.75 inches thick, per the manufacturer specification.

Installation Notes

Installation is performed by drilling a pilot hole sized to the anchor body diameter, inserting the anchor flush with the wall surface, then driving the screw to expand the sleeve. Power down any circuits in the wall cavity before drilling to avoid contact with wiring. Follow local building codes and manufacturer load ratings when selecting anchor quantity and placement for structural or safety-critical hardware.