Value Collection NFC6715 Steel Sleeve Drywall Anchor

Product Description

The VALUE COLLECTION NFC6715 is a steel sleeve-style hollow wall anchor designed for fastening into drywall where solid backing is not available. The anchor body is zinc-plated steel, providing corrosion resistance suitable for interior applications. It accepts a 5/16-inch screw and is rated for use in wall material ranging from 1/8 inch to 1/4 inch thick. Installation expands the sleeve behind the drywall face to distribute load across the back surface of the panel. Electricians, HVAC installers, plumbers, and general contractors use these anchors when securing light-duty fixtures, brackets, or equipment to hollow drywall partitions.

This anchor is intended for standard interior drywall installations. It is suited for light-duty fastening tasks where the wall cavity behind the drywall does not provide solid stud backing. Typical applications include mounting junction box brackets, small conduit supports, pipe hangers, thermostat backplates, and similar fixtures to single-layer gypsum board walls. The 1/8-inch to 1/4-inch wall thickness range covers standard 1/2-inch and 5/8-inch drywall face material at typical installation points.

Key Features

• Steel sleeve construction with zinc-plated finish for interior corrosion resistance
• 0.125-inch anchor diameter fits standard pre-drilled pilot holes in drywall
• 0.75-inch overall length accommodates wall material from 0.125 inches to 0.25 inches thick
• Accepts a 5/16-inch screw for consistent, repeatable installation
• Sleeve expands behind the drywall face to distribute load without solid backing

Compatibility

Designed as an OEM-style replacement and general-use sleeve anchor for standard interior drywall hollow wall fastening applications.

Installation Notes

Installation requires a pre-drilled pilot hole sized to match the anchor diameter. Insert the anchor flush with the wall surface before driving the screw. Power down any nearby electrical circuits before drilling into finished walls. Follow applicable local building codes and the anchor manufacturer load ratings when selecting anchors for weight-bearing applications.