Value Collection NFC5261 Toggle Bolt Wall Anchor 830 Lb

Product Description

The VALUE COLLECTION NFC5261 is a steel toggle bolt anchor designed for fastening into hollow walls and similar substrates. With a 1/4-inch diameter, 6-inch overall length, and a 1/4-inch screw, this anchor delivers a maximum load capacity of 830 pounds, making it a dependable choice for medium-to-heavy fastening tasks. The zinc finish provides corrosion resistance for interior applications. Electricians, plumbers, HVAC technicians, and general contractors reach for toggle bolts when securing equipment, conduit, pipe hangers, or fixtures to hollow wall assemblies where solid backing is unavailable.

This anchor is suited for use in wallboard, plaster, hollow tile, and concrete or masonry substrates. It is commonly installed in commercial and residential settings where surface-mounted hardware must be anchored through drywall or similar finish materials into the hollow cavity behind. The slotted and Phillips drive type allows installation with standard hand tools, making it accessible in a wide range of job-site conditions without specialty equipment.

Key Features

• 830-pound maximum load capacity for medium-to-heavy fastening applications
• 1/4-inch diameter by 6-inch overall length with a 1/4-inch screw
• Steel construction with zinc finish for corrosion resistance
• Slotted and Phillips drive compatibility for versatile tool use
• Rated for use in wallboard, plaster, hollow tile, and concrete or masonry

Compatibility

Designed for use in hollow wall assemblies including drywall wallboard, plaster, hollow tile, and concrete or masonry substrates where toggle-style anchoring is required.

Installation Notes

Toggle bolt anchors are installed by trade professionals including electricians, HVAC technicians, and plumbers when securing hardware to hollow wall surfaces. Before installation, ensure power is off to any nearby electrical circuits and the wall cavity is clear of obstructions. Drill a clearance hole sized to allow the folded toggle to pass through, insert the bolt with the toggle collapsed, and tighten until the toggle seats firmly against the back of the wall surface. Do not overtighten, as excessive torque can pull the anchor through the substrate.