Value Collection NFC2313F Hammer Drive Concrete Anchor

Product Description

The VALUE COLLECTION NFC2313F is a hammer drive concrete anchor designed for fast, tool-minimal fastening into concrete, masonry, and block substrates. The anchor body is constructed from nylon with a zinc-plated finish, measuring 3/16 inches in diameter with an overall length of 1-1/2 inches. Installation requires a 3/16 inch drill bit to pre-drill the pilot hole. The flat head profile sits flush against the work surface once driven, making it well suited for applications where a low-profile fastener is required. This type of anchor is installed by general contractors, electricians, plumbers, and HVAC technicians when securing conduit straps, pipe hangers, equipment bases, and similar light-duty fixtures to concrete or masonry.

The NFC2313F is appropriate for light-duty anchoring tasks in residential and commercial settings. Typical applications include securing junction box brackets, conduit supports, pipe clamps, and small equipment mounting plates to poured concrete, concrete block, or similar hard substrates. The nylon body provides corrosion resistance in mildly damp environments where a steel anchor might be less suitable. This anchor is sold individually but carries a minimum order quantity of 100 units, making it practical for stocking on service vehicles or in shop inventory for recurring fastening tasks.

Key Features

• Nylon anchor body offers inherent corrosion resistance for use in damp or corrosive conditions
• Zinc-plated finish on fastener hardware adds an additional layer of corrosion protection
• Flat head design seats flush with the work surface for low-profile installations
• 3/16 inch diameter matches a standard drill bit size for straightforward pilot hole prep
• 1-1/2 inch overall length suits light-duty fastening into concrete and masonry
• Hammer drive installation eliminates the need for a screwdriver or wrench once the hole is drilled

Compatibility

Designed as an OEM-style replacement and general-use hammer drive anchor for light-duty fastening into concrete, masonry, and block substrates where a 3/16 inch pilot hole is required.

Installation Notes

Installation is typically performed by any trade professional requiring a concrete fastener. Before drilling, confirm the substrate is sound and verify no embedded utilities are present in the drill path. Use a 3/16 inch carbide-tipped masonry drill bit to bore the pilot hole to the required depth, then clear dust from the hole before driving the anchor. Drive the anchor using a hammer until the head is flush; do not over-drive, as the nylon body can deform under excessive impact force.