Value Collection NFC2001 Plastic Concrete Anchor 1/8 in Dia

Product Description

The VALUE COLLECTION NFC2001 is a plastic concrete anchor designed for light-duty fastening applications in masonry and concrete substrates. At 0.125 inches in diameter and 1 inch in overall length, this compact anchor accepts No. 1 through No. 3 screws and provides a secure hold in predrilled concrete, block, or brick. The plastic body resists corrosion and is suitable for interior installations where metal anchors are not required. Installation is straightforward and does not require specialty tools, making it a practical choice for electricians, plumbers, and general contractors who need a reliable low-profile fastener for routing, mounting, or securing light components to masonry surfaces.

This anchor is well suited for residential and light commercial applications where small-diameter fasteners are needed to attach conduit clips, wire management hardware, junction box supports, or similar fixtures to concrete or masonry walls. The 0.125-inch diameter keeps the required pilot hole small, minimizing surface disruption. Compatible with No. 1 to No. 3 screws, it covers a range of common light-duty fastener sizes used across electrical, plumbing, and finish trades.

Key Features

• Plastic construction resists corrosion in damp or humid indoor environments
• 0.125-inch diameter requires a minimal pilot hole in concrete or masonry
• 1-inch overall length suits shallow embedment in solid substrates
• Accepts No. 1 through No. 3 screws for light-duty fastening tasks
• Compact profile minimizes surface disruption during installation

Compatibility

Designed for use with No. 1 to No. 3 screws in concrete, block, and masonry substrates. Intended for light-duty indoor fastening applications typical of residential and light commercial construction.

Installation Notes

Drill a pilot hole in the concrete or masonry surface sized to match the 0.125-inch anchor diameter before inserting. Tap the anchor flush with the surface using a hammer, then drive the appropriate screw to expand and seat the anchor. Follow applicable building codes for fastener spacing and embedment depth when securing electrical or mechanical components to structural masonry. Do not use in overhead load-bearing or high-vibration applications beyond the rated screw size range.