Value Collection NB03060 Black Steel Pipe Nipple Sch 40

Product Description

The VALUE COLLECTION NB03060 is a black steel pipe nipple sized at 3/8 inch diameter and 6 inches long, manufactured to Schedule 40 wall thickness. This close-tolerance threaded fitting is used to connect sections of pipe in low-pressure fluid and gas distribution systems. The black finish is a standard mill coating applied to carbon steel pipe nipples intended for steam, water, air, and gas service. Threads conform to ANSI B1.20.1 and ASME B1.20.1 standards, ensuring reliable engagement with compatible fittings. Licensed plumbers and pipefitters install this type of nipple in both residential and light commercial applications.

This nipple is suited for use in residential plumbing, HVAC hydronic systems, compressed air lines, and natural gas or propane distribution piping where a short threaded extension is needed between fittings, valves, or equipment connections. The 3/8 inch thread size is common in branch lines and low-flow service connections. It is appropriate for indoor installations where the pipe will not be exposed to corrosive environments that would degrade the black steel finish over time.

Key Features

• Schedule 40 wall thickness for standard-duty pressure service
• Threads meet ANSI B1.20.1 and ASME B1.20.1 specifications for consistent fit
• Carbon steel construction rated for steam, water, air, and gas lines
• Black mill finish standard for gas and steam pipe applications
• 3/8 inch NPT thread size compatible with standard fittings and valves
• Compact 6 inch length for close-quarter connections

Compatibility

Designed as a standard-duty replacement or new-installation nipple for Schedule 40 black steel pipe systems using 3/8 inch NPT threaded fittings, valves, and equipment connections.

Installation Notes

Installation should be performed by a licensed plumber or pipefitter in accordance with applicable local codes and the International Fuel Gas Code or International Plumbing Code as appropriate. Apply an approved thread sealant or PTFE tape to the male threads before assembly, and hand-tighten before using a pipe wrench. Always shut off and depressurize the system before making any connections or disconnections. Do not over-tighten, as this can crack fittings or distort threads.