Value Collection MSRNYD2-3753 D Shaped Ring Terminal

Product Description

The VALUE COLLECTION MSRNYD2-3753 is a partially insulated, D-shaped ring terminal designed for crimp-style wire termination on 16 to 14 AWG copper conductors. The blue nylon insulation sleeve provides partial coverage for visual identification and basic strain relief at the barrel. The copper contact delivers reliable conductivity, and the crimp connection creates a mechanically secure, vibration-resistant bond without soldering. At 0.996 inches long and 0.339 inches wide, this compact terminal fits tight wiring harnesses and panel layouts. Electricians, HVAC technicians, and panel builders use this terminal where dependable ring-lug connections are required on control wiring and low-voltage circuits.

This terminal is suited for residential and light commercial electrical applications including control panels, HVAC equipment wiring, junction boxes, and equipment grounding or signal runs. It accepts stud sizes 6, 8, and 10, making it versatile across a range of terminal blocks, bus bars, and equipment mounting studs. The blue color coding follows standard AWG color conventions for 16 to 14 AWG wire, which aids in fast identification during installation and inspection. It is appropriate wherever a compact, partially insulated ring lug is called for on low-voltage or control-circuit wiring.

Key Features

• Partially insulated nylon sleeve for visual identification and basic strain relief
• Crimp connection compatible with 16 to 14 AWG wire (1.50 to 2.50 sq mm)
• Copper contact material for reliable electrical conductivity
• Accepts stud sizes 6, 8, and 10 (3.70 to 5.30 mm)
• Blue color coding aligns with standard 16 to 14 AWG wire identification
• cUL Listed, UL Listed, and RoHS Compliant

Compatibility

Designed as a standard crimp ring terminal for use with 16 to 14 AWG wire on stud sizes 6, 8, and 10.

Installation Notes

Installation should be performed by a qualified electrician or trained technician in accordance with NEC requirements. De-energize the circuit completely before terminating any conductors. Use a calibrated ratcheting crimp tool sized for the 16 to 14 AWG range to achieve a proper crimp — do not use pliers or uncalibrated tools, as an improper crimp can result in high resistance or pull-out failure. Inspect the finished crimp for barrel deformation and confirm the insulation sleeve is not cracked before closing the panel or enclosure.