Value Collection MSFX08030-050BX M8x1.25 Flat Head Slotted Screw 50pk

Product Description

The VALUE COLLECTION MSFX08030-050BX is a metric flat head slotted machine screw manufactured from grade 18-8 stainless steel (A2) with a bright, uncoated finish. The screw features an M8x1.25 thread size and a 30 mm overall length, conforming to DIN 963 dimensional standards. The flat head profile allows the fastener to sit flush with or below the surface of the mating material when installed into a countersunk hole. These screws are sold in a minimum order quantity of 50 units per box and are suited for general mechanical assembly work requiring corrosion-resistant metric fasteners.

These flat head slotted screws are used in light to medium-duty mechanical assemblies, enclosures, brackets, and panels where a flush surface finish is required. The stainless steel construction makes them appropriate for applications exposed to moisture, mild chemicals, or outdoor conditions. Typical installation environments include HVAC equipment panels, electrical enclosures, plumbing fixtures, and marine or pool equipment housings. A conventional slotted screwdriver or bit is used for installation. The DIN 963 standard governs head geometry, ensuring dimensional interchangeability with other DIN 963-compliant hardware.

Key Features

• M8x1.25 metric thread for compatibility with standard M8 tapped holes and nuts
• Flat head countersunk profile allows flush or recessed installation per DIN 963
• Grade 18-8 A2 stainless steel construction provides corrosion resistance in wet or outdoor environments
• Bright, uncoated finish with no added plating or coating that could affect thread tolerances
• 30 mm overall length suitable for moderate-depth fastening applications
• Sold in a 50-unit box quantity for job-site and shop stock use

Compatibility

Designed for use in any application requiring a DIN 963 flat head slotted metric machine screw with an M8x1.25 thread pitch and 30 mm length. Compatible with standard M8 nuts, threaded inserts, and tapped holes machined to M8x1.25 specifications.

Installation Notes

Installation requires a slotted screwdriver or bit sized to match the DIN 963 head slot for the M8 diameter. Verify that the mating material has been countersunk to the correct angle to accept a flat head per DIN 963 before driving the fastener. Do not exceed the torque capacity of the stainless steel fastener, as 18-8 stainless can gall under excessive load; applying an anti-seize compound to the threads before installation helps prevent galling. Torque to the value specified by the assembly designer or applicable mechanical standard for the joint in question.