Value Collection LWHIS0750USA-025BX Split Lock Washer

Product Description

The VALUE COLLECTION LWHIS0750USA-025BX is a Grade 2 spring steel split lock washer designed for 3/4 inch screw applications. The split ring design applies tension between the fastener and the mating surface, resisting loosening caused by vibration, torque, and thermal cycling. With a zinc plated finish, the washer offers a basic level of corrosion resistance suitable for general indoor and light-duty outdoor fastening applications. The inside diameter measures 0.753 inches minimum and 0.766 inches maximum, the outside diameter measures 1.285 inches maximum, and the washer thickness is 0.226 inches. This item ships in a minimum order quantity of 25 washers per package, making it practical for job-lot restocking by mechanical contractors, plumbers, electricians, and general maintenance professionals.

Split lock washers in this size range are widely used in residential and light commercial construction and maintenance. They are installed under bolt heads or nuts wherever fastener preload retention is required on steel, iron, or structural assemblies. Common applications include equipment mounting, pipe hanger hardware, panel fastening, and structural connections. The 3/4 inch screw size fits standard hex bolts and cap screws in that nominal thread diameter.

Key Features

• Grade 2 spring steel construction provides reliable tension and bite under load
• Zinc plated finish for basic corrosion resistance in general-duty environments
• Inside diameter range of 0.753 to 0.766 inches fits standard 3/4 inch fasteners
• Maximum outside diameter of 1.285 inches suits standard bearing surfaces for this screw size
• Washer thickness of 0.226 inches delivers consistent spring action
• Minimum order quantity of 25 units suits bulk restocking for active job sites

Compatibility

Designed as a standard replacement or restocking split lock washer for 3/4 inch nominal screw and bolt applications in general mechanical, structural, and maintenance assemblies.

Installation Notes

Split lock washers are installed by qualified mechanics, contractors, or maintenance technicians as part of a fastener assembly. Place the washer between the nut or bolt head and the mating surface before tightening. Torque fasteners to the specification required by the joint design and applicable codes. Inspect washers for cracking or deformation before reuse, as a compromised spring section will not provide adequate preload retention.