Value Collection KP82099 Blind Rivet Size 64 Dome Head Ss 250pk

Product Description

The VALUE COLLECTION KP82099 is an open end blind rivet in size 64 with a dome head profile, offered in a 250-piece pack. The body and mandrel are both 18-8 stainless steel, making this fastener well suited for corrosive or high-moisture environments where carbon steel hardware would degrade. The body diameter is 3/16 inches, grip range runs from 0.188 to 0.250 inches, and the head diameter is 3/8 inches. Tensile strength is rated at 1,200 pounds and shear strength at 950 pounds. This rivet meets IFI 114 Grade 51 standards. Installation requires a standard blind rivet tool and a No. 11 drill bit for the pilot hole.

This rivet is used across a wide range of trade and industrial applications wherever a one-sided fastening is required and access to the back of the workpiece is limited or impossible. Common applications include sheet metal assembly, HVAC ductwork panels, electrical enclosures, plumbing brackets, equipment housings, and general structural fabrication. The stainless steel construction makes it a practical choice in outdoor, marine-adjacent, or wet-service installations where corrosion resistance is a priority. The 250-piece pack quantity suits jobsite stocking and repetitive production work.

Key Features

• 18-8 stainless steel body and mandrel for corrosion resistance
• Dome head profile with 3/8 inch head diameter and 0.060 inch head height
• Grip range of 0.188 to 0.250 inches suits typical sheet metal stacks
• Tensile strength of 1,200 pounds and shear strength of 950 pounds
• Meets IFI 114 Grade 51 fastener standard
• 250-piece pack for high-volume or jobsite use

Compatibility

Designed for use in any application requiring a size 64 open end blind rivet with a 3/16 inch body diameter and a hole diameter between 0.192 and 0.196 inches, drilled with a No. 11 bit.

Installation Notes

Install with a manual or pneumatic blind rivet tool sized for a 3/16 inch body diameter. Drill the pilot hole to between 0.192 and 0.196 inches using a No. 11 drill bit before setting the rivet. Ensure the material stack falls within the 0.188 to 0.250 inch grip range for a proper set. Remove mandrel stems from the work area after installation to prevent FOD issues in enclosed assemblies.