Value Collection G90R 15X10 Reducing Elbow 1/2x3/8

Product Description

The VALUE COLLECTION G90R 15X10 is a galvanized malleable iron reducing elbow designed for threaded pipe systems in plumbing, gas distribution, and industrial piping applications. This 90-degree elbow transitions from a 1/2-inch pipe to a 3/8-inch pipe, making it suitable for runs where line size must be reduced at a change of direction. Rated at 300 psi for liquid and gas service and 150 psi for steam, it is built to handle demanding pressure conditions. The galvanized finish provides corrosion resistance for use in wet or exposed environments. Installation is performed by licensed plumbers or pipefitters.

This fitting is used in residential and light commercial piping systems where a directional change and size reduction are needed at the same junction. Common applications include gas supply lines, water distribution, compressed air, and industrial fluid systems. The threaded end connection is compatible with standard NPT pipe threads, allowing integration into existing threaded piping systems without special tooling beyond standard pipe wrenches and thread sealant.

Key Features

• Reduces from 1/2 inch to 3/8 inch in a single 90-degree elbow fitting
• Rated 300 psi for liquid and gas service
• Rated 150 psi for steam service
• Galvanized finish for corrosion resistance in wet or exposed environments
• Class 150 malleable iron construction for durability under pressure cycling
• Meets FM, ISO 7/1, NSF/ANSI 372, NSF/ANSI 61, and cULus listing requirements

Compatibility

Designed as an OEM-style threaded replacement fitting for Class 150 malleable iron pipe systems using 1/2-inch to 3/8-inch NPT threaded connections in gas, liquid, or steam service.

Installation Notes

This fitting is installed by licensed plumbers or pipefitters following applicable IPC and IFGC code requirements. Shut off and depressurize the supply line before removing or installing any threaded fitting. Apply appropriate thread sealant or PTFE tape to male threads before assembly, and tighten with pipe wrenches to a wrench-tight fit. Do not overtighten malleable iron fittings, as the material is strong but not immune to cracking under excessive torque.