Value Collection G90 50 Malleable Iron 90 Elbow 2 in

Product Description

The VALUE COLLECTION G90 50 is a Class 150 malleable iron 90-degree elbow designed for threaded pipe systems in plumbing, gas distribution, and industrial piping applications. Manufactured from malleable iron with a galvanized finish coating, this fitting connects two pipe runs at a 90-degree angle and is rated for 300 psi with liquid and gas service and 150 psi with steam service. The 2-inch threaded end connections follow standard tapered thread engagement. Licensed plumbers, pipefitters, and mechanical contractors install this fitting in both new construction and retrofit piping work where a durable, pressure-rated directional change is required.

This elbow is suited for residential and commercial piping systems carrying water, gas, or steam. The galvanized malleable iron construction resists corrosion in wet service environments. Typical install scenarios include gas supply lines, hydronic heating distribution, compressed air headers, and general plumbing rough-in work where a 90-degree change of direction is needed at a 2-inch pipe size. Compliance with NSF/ANSI 61 makes this fitting appropriate for potable water systems, and NSF/ANSI 372 addresses lead content requirements for drinking water use.

Key Features

• 300 psi liquid and gas pressure rating for demanding service conditions
• 150 psi steam pressure rating for hydronic and steam distribution systems
• Galvanized malleable iron construction provides corrosion resistance
• Threaded end connections for standard tapered pipe thread engagement
• NSF/ANSI 61 and NSF/ANSI 372 certified for potable water applications
• FM Approved and cULus Listed for code-compliant installations

Compatibility

Designed as a Class 150 OEM-style replacement or new-installation fitting for 2-inch threaded malleable iron pipe systems in plumbing, gas, and steam service applications conforming to ISO 7/1 thread standards.

Installation Notes

Installation should be performed by a licensed plumber or pipefitter in accordance with the applicable edition of the International Plumbing Code or International Fuel Gas Code. Shut off and depressurize the pipe system completely before removing or installing any threaded fitting. Apply an appropriate thread sealant or PTFE tape to the male threads before making up the joint; do not over-tighten, as malleable iron threads can crack under excessive torque. Verify pressure rating compatibility with the system's operating conditions before placing the fitting in service.