Value Collection G240 50X32 Reducing Coupling 2x1-1/4 in

Product Description

The VALUE COLLECTION G240 50X32 is a malleable iron reducing coupling designed to connect pipes of two different diameters in threaded piping systems. This fitting transitions from a 2-inch pipe to a 1-1/4-inch pipe and is rated for 300 psi with liquid and gas service and 150 psi in steam service. The galvanized finish provides corrosion resistance for both above-ground and exposed installations. Plumbers and pipefitters install this coupling in commercial and industrial piping systems where diameter reduction is required without adding extra fittings or offsets.

This reducing coupling is suited for residential and commercial plumbing, gas distribution, and steam piping applications. The threaded end connections conform to ISO 7/1 standards, making it compatible with standard NPT-style threaded pipe systems. The Class 150 rating places it in the most common service category for malleable iron fittings used in low-to-medium pressure water, gas, and steam lines. Pipefitters working on mechanical rooms, boiler rooms, or utility piping runs will find this a standard inline fitting for reducer applications.

Key Features

• Malleable iron construction with galvanized finish for corrosion resistance
• Reduces from 2-inch to 1-1/4-inch pipe in a single inline fitting
• 300 psi liquid and gas pressure rating
• 150 psi steam pressure rating
• Threaded end connections per ISO 7/1 standard
• Class 150 fitting, compatible with standard malleable iron piping systems

Compatibility

Designed as an OEM-style replacement or new-installation reducing coupling for Class 150 malleable iron threaded piping systems handling liquid, gas, or low-pressure steam service.

Installation Notes

This fitting is installed by licensed plumbers or pipefitters. Shut off the supply line and depressurize the system completely before removing or installing any threaded fitting. Apply an appropriate thread sealant or PTFE tape to the male threads before engagement and tighten to proper engagement depth without over-torquing the fitting. Work must comply with applicable local plumbing codes and IFGC requirements for gas service applications.