Value Collection DC4511HS Dovetail Cutter 45 Deg Hss

Product Description

The VALUE COLLECTION DC4511HS is a 45-degree dovetail cutter designed for machining dovetail slots and angular undercuts in metalworking and general machining applications. Built from high speed steel (HSS), this cutter delivers reliable cutting performance across a range of workpiece materials. It features a 1.375-inch cutting diameter and a 0.5625-inch cutting width, making it well suited for producing dovetail features in a single pass on compatible milling machines. The 5/8-inch shank diameter provides secure tool holding in standard collets and end mill holders. Machinists and toolroom operators rely on this cutter for precision slot work in both production and job-shop environments.

This dovetail cutter is used in vertical milling machine setups where angular dovetail profiles are required for slides, ways, T-slots, and fixture components. It is appropriate for light to medium-duty cutting in mild steel, aluminum, brass, and similar machinable materials. The 45-degree included angle is a standard geometry widely specified in machine tool and fixture design, making this cutter a common toolroom staple. The 2-5/16-inch shank length provides adequate reach for most standard knee mill and CNC knee mill setups.

Key Features

• 45-degree included angle for standard dovetail slot geometry
• 1.375-inch cutting diameter for full-width dovetail passes
• 0.5625-inch cutting width produces consistent dovetail depth
• High speed steel construction for durability across common workpiece materials
• 5/8-inch shank diameter fits standard collets and end mill holders
• 2-5/16-inch shank length provides adequate reach in typical milling setups

Compatibility

Designed as a standard dovetail cutter for use in vertical milling machines equipped with a 5/8-inch collet or end mill holder accepting a straight shank tool.

Installation Notes

Installation should be performed by a qualified machinist. Secure the shank fully into a properly sized collet or end mill holder and torque the drawbar or retention system per the machine tool manufacturer specifications before cutting. Power down and lock out the milling machine spindle before changing or inspecting the cutter. Inspect the cutting edges for chips or wear before each use and do not exceed the feed and speed parameters appropriate for the workpiece material and machine rigidity.