Value Collection CD552547 Standard Clevis Pin 0.25 in

Product Description

The VALUE COLLECTION CD552547 is a standard clevis pin designed for use in mechanical linkage and fastening applications. Manufactured from zinc-plated steel, this pin measures 0.25 inches in pin diameter and 1.5 inches in overall length, with a usable length of 1-13/32 inches. The 5/64-inch hole accepts a cotter pin or snap ring to secure the pin in place during operation. It is a general-purpose hardware component suited for light mechanical assemblies, clevis brackets, rod ends, and linkage connections commonly serviced by maintenance technicians and mechanical tradespeople.

This clevis pin is appropriate for use in a wide range of mechanical and industrial applications where a removable, loadable pin fastener is required. Typical installations include control linkages, gate hardware, hydraulic cylinder rod ends, and general machinery pivot points. It is packaged in a quantity of 25 units per pack, making it practical for shop stock and field service kits where multiple pins are needed for routine maintenance or assembly work.

Key Features

• 0.25-inch pin diameter for standard clevis bracket fitment
• 1.5-inch overall length with 1-13/32 inches of usable length
• 5/64-inch cross hole for cotter pin or snap ring retention
• Zinc-plated steel construction provides corrosion resistance in typical indoor and light outdoor environments
• Packaged in quantities of 25, suitable for shop stock or bulk service use

Compatibility

Designed as a standard-dimension clevis pin for mechanical linkage assemblies requiring a 0.25-inch pin diameter and 1.5-inch overall length with a 5/64-inch retention hole.

Installation Notes

Installation is performed by maintenance technicians or mechanical tradespeople. Always de-energize and lock out any powered equipment before removing or installing clevis pins in linkage assemblies. Insert the pin fully through the clevis and mating component, then secure with an appropriate cotter pin or snap ring through the cross hole. Inspect the mating clevis bore for wear before installing a new pin.