Value Collection CA7049U61 Cut-off Wheel 7 in 60 Grit

Product Description

The VALUE COLLECTION CA7049U61 is a reinforced aluminum oxide cut-off wheel designed for stationary cutting tools used in fabrication, metalworking, and maintenance applications. At 7 inches in diameter and 0.060 inches thick, this wheel is built for straight, controlled cuts on metal stock. The 60-grit medium-grade abrasive provides an efficient material removal rate suitable for general-purpose cutting tasks. Rated at a maximum of 8,732 RPM, it is sized for stationary tool spindles with a 1-1/4 inch arbor hole. Fiberglass reinforcement adds structural integrity under load and lateral stress.

This cut-off wheel is intended for use with stationary cutting machines such as chop saws and abrasive cutoff saws in shop or fabrication environments. It is suited for cutting mild steel, ferrous metals, and similar materials in trade or industrial settings. Machinists, fabricators, maintenance technicians, and metalworkers are the primary installers and end users. The medium hardness rating and A60O specification make it appropriate for medium-duty cutting on standard ferrous workpieces.

Key Features

• 7 inches diameter with 1-1/4 inches arbor hole fits standard stationary abrasive cutoff machines
• Aluminum oxide abrasive material rated for ferrous metal cutting
• 60 grit medium grade delivers efficient material removal with controlled cut quality
• Fiberglass-reinforced construction for added strength under operating stress
• Maximum rated speed of 8,732 RPM matches stationary tool operating ranges
• Wheel specification A60O US confirms grade and hardness code for consistent performance

Compatibility

Designed for use with stationary abrasive cutting tools that accept a 7 inch diameter wheel with a 1-1/4 inch arbor hole. Verify machine speed rating does not exceed 8,732 RPM before installation.

Installation Notes

Installation should be performed by qualified personnel familiar with abrasive wheel safety per ANSI B7.1 guidelines. Always power down and disconnect the machine before mounting or removing a wheel. Inspect the wheel for cracks or damage before each use and never operate above the maximum rated RPM. Use the correct flanges and arbor hardware specified by the machine manufacturer.