Value Collection CA4082U31 Cut-off Wheel 36 Grit Steel

Product Description

The VALUE COLLECTION CA4082U31 is a Type 1 aluminum oxide cut-off wheel designed for aggressive cutting on steel and other ferrous materials. Measuring 4 inches in diameter and 1/8 inch thick with a 1/4-inch arbor hole, this wheel mounts directly to standard die grinders. The 36-grit aluminum oxide abrasive with resinoid bond delivers fast, consistent cuts, while the reinforced construction handles the stress of high-speed operation up to 19,000 RPM. The hardness code R designation indicates a relatively hard wheel suited to ferrous metal stock removal. Fabricators, pipefitters, and general metalworkers reach for this wheel when straight cut-off work on structural steel, pipe, or flat stock is required.

This cut-off wheel is suited for use in fabrication shops, maintenance facilities, and field service applications where die grinder access is needed. Its compact 4-inch diameter makes it practical in tight clearances where larger angle grinder wheels cannot reach. The 1/4-inch arbor hole fits standard die grinder mandrels commonly used across the trade.

Key Features

• 4-inch diameter, 1/8-inch thick Type 1 (01/41) flat profile for straight cut-off work
• Aluminum oxide abrasive at 36 grit for fast cutting on steel and ferrous metals
• Resinoid bond with reinforced construction for durability under load
• Rated to 19,000 RPM maximum — compatible with standard die grinder speeds
• 1/4-inch arbor hole fits common die grinder mandrels
• Hardness Code R for firm cutting performance on harder workpieces

Compatibility

Designed for use with die grinders accepting a 1/4-inch arbor. Rated for steel applications per specification A36R US.

Installation Notes

Installation and wheel changes must be performed by qualified personnel familiar with abrasive wheel safety. Always disconnect or de-energize the die grinder before mounting or removing a wheel. Verify that the tool RPM rating meets or exceeds the 19,000 RPM maximum rating stamped on the wheel before operation. Never exceed the wheel's rated maximum RPM, and always use appropriate eye and face protection in accordance with ANSI B7.1 safety standards for abrasive wheels.