Value Collection C37036 Hammer Drive Concrete Anchor

Product Description

The VALUE COLLECTION C37036 is a hammer drive concrete anchor designed for fast, tool-simple fastening into concrete, masonry, and block. The anchor is driven into a pre-drilled hole using a hammer, expanding on impact to lock into the base material. At 1/4 inch in diameter with a 3 inch overall length and a minimum embedment depth of 2-1/4 inches, this anchor suits light-to-medium duty fastening tasks. Constructed from steel with a zinc-plated finish for corrosion resistance, it features a truss head profile for broad bearing surface contact. Sold in a 100-piece package, it is suited for volume installation work by contractors and maintenance professionals.

This anchor is used in residential and commercial applications where a permanent, flush-head fastening point is needed in concrete or masonry substrates. Typical scenarios include securing electrical conduit straps, pipe hangers, junction box brackets, threshold plates, and light fixtures directly to concrete floors, walls, or ceilings. The truss head provides a low-profile, wide-bearing finish appropriate for surface-mounted hardware. The 1/4 inch drill size means installation requires only a standard 1/4 inch carbide-tipped masonry bit, a hammer drill, and a setting punch or hammer.

Key Features

• 1/4 inch anchor diameter with matching 1/4 inch drill requirement for straightforward hole prep
• 3 inch overall length with 2-1/4 inch minimum embedment for solid mechanical hold
• Steel construction with zinc-plated finish for general-purpose corrosion resistance
• Truss head profile provides wide bearing surface and low-profile appearance at the substrate face
• Hammer-drive installation requires no specialty setting tool beyond a standard hammer
• Packaged in quantities of 100 for efficient use on production or multi-point installations

Compatibility

Designed as an OEM-style replacement and standard-specification hammer drive anchor for use in concrete, block, and masonry base materials requiring a 1/4 inch diameter fastener.

Installation Notes

Installation is performed by drilling a 1/4 inch diameter hole to the required depth using a carbide-tipped masonry bit in a hammer drill, then inserting the anchor and driving it flush with a standard hammer. Ensure hole depth meets or exceeds the 2-1/4 inch minimum embedment before setting. These anchors are intended for permanent installation and are not designed to be removed and reused once set. Follow applicable building codes and fastener manufacturer load tables when determining anchor spacing and edge distance for structural or safety-critical connections.