Value Collection BS26N0053 Jobber Drill Bit 53 Wire Hss

Product Description

The VALUE COLLECTION BS26N0053 is a wire gauge size 53 jobber-length drill bit designed for general-purpose drilling in steel, aluminum, non-ferrous metals, and wood. Manufactured from high speed steel (HSS) with a bright uncoated finish, this bit features a 140-degree split-point tip angle and a fast spiral flute geometry. The web-thinned, tapered web configuration reduces thrust requirements when entering material. At 1.875 inches overall length with a 0.875-inch flute length, this is a compact bit suited for tight-clearance work and precision pilot holes. The straight cylindrical shank seats directly in standard drill chucks without adapters.

This bit is intended for use in handheld drills, drill presses, and CNC drilling operations where wire gauge tooling is required. Wire size 53 corresponds to a decimal diameter of 0.0595 inches, making it a common choice for tapping pilot holes, light-gauge sheet metal, printed circuit board work, and small-diameter through-holes in aluminum and mild steel. Right-hand cutting direction is standard for conventional drilling setups. No coolant-through capability is present, so flood or mist cooling is applied externally if required for production runs.

Key Features

• Wire gauge size 53 with 0.0595-inch decimal diameter for precise small-bore drilling
• 140-degree point angle reduces walking and improves hole entry accuracy
• Fast spiral flute design promotes efficient chip evacuation in metals and wood
• Web-thinned tapered web lowers axial thrust for reduced bit deflection
• High speed steel construction handles general-purpose drilling across ferrous and non-ferrous materials
• Bright uncoated finish allows easy visual inspection for wear and damage

Compatibility

Designed as a general-purpose replacement or stock jobber drill bit for any application requiring wire gauge size 53 tooling. Fits standard drill chucks accepting a 0.0595-inch straight cylindrical shank. Conforms to ANSI specification for jobber-length drill geometry.

Installation Notes

A licensed machinist or qualified technician should verify chuck runout before seating small-diameter bits, as even minor runout accelerates breakage at this diameter. Secure the shank fully into the chuck and confirm concentricity before beginning a cut. When drilling metals, use appropriate cutting fluid applied externally to extend bit life and prevent work hardening. Avoid excessive feed pressure, which is the primary cause of breakage on wire-gauge bits.