Value Collection BOW-998675 Heat Shrink Sleeve 6 in

Product Description

The VALUE COLLECTION BOW-998675 is a heat shrink sleeve designed for insulating, bundling, and protecting wire connections and cable terminations. Constructed from ionic polymer material with a 2.5:1 shrink ratio, this clear sleeve starts at 0.26 inches inside diameter and shrinks down to 0.045 inches ID upon application of heat at 194 degrees F. The 6-inch overall length accommodates standard splice and termination work on light-gauge wiring. Electricians and electronics technicians install this sleeve where a clean, low-profile insulation wrap is required on small-diameter conductors.

This sleeve is suited for residential and commercial electrical work, control wiring, and low-voltage applications involving 18 to 22 AWG conductors. It is commonly used during panel wiring, sensor lead splicing, and connector terminations where a tight, finished insulation sleeve is needed. The clear color allows visual inspection of the underlying conductor or splice after shrinking, which is useful during quality checks and troubleshooting.

Key Features

• 2.5:1 shrink ratio delivers a secure, form-fitting insulation layer over splices and terminations
• Shrinks at 194 degrees F using a heat gun or similar tool — no open flame required for controlled application
• Clear ionic polymer construction allows post-installation visual inspection of the covered connection
• Compatible with 18 to 22 AWG wire sizes for light-gauge control and signal wiring
• Wide operating temperature range of -67 degrees F to 257 degrees F suits both indoor and moderate-environment installations
• RoHS compliant for use in applications requiring restricted hazardous substance standards

Compatibility

Designed for use with 18 to 22 AWG conductors as an OEM-style heat shrink insulation sleeve for electrical splices, terminations, and wire bundling applications.

Installation Notes

Installation is typically performed by licensed electricians or electronics technicians following applicable NEC guidelines for insulated connections. De-energize all circuits before applying the sleeve to exposed conductors or splices. Use a heat gun set to an appropriate temperature to shrink the sleeve evenly from one end to the other — avoid prolonged localized heat application that could damage adjacent components. Ensure the wire and splice are clean and dry before installing the sleeve.