Value Collection BOW-23833 Ring Terminal 12-10 Awg

Product Description

The VALUE COLLECTION BOW-23833 is a partially insulated circular ring terminal designed for crimp-style wire terminations on 12 to 10 AWG copper conductors. The terminal features a copper contact and a yellow polyolefin heat-shrink insulation sleeve that provides a secure, moisture-resistant grip after crimping. With a 1/2-inch stud size, it fits standard bolt and screw terminal connections found in electrical panels, control enclosures, and equipment wiring harnesses. Electricians and panel technicians use these terminals to create clean, permanent lug connections without soldering.

This ring terminal is suited for residential and light commercial electrical work, control panel assembly, and equipment termination applications where a reliable mechanical and electrical connection to a threaded stud or binding post is required. The partially insulated design exposes the barrel for visual inspection of the crimp while the insulation collar protects the wire entry point. These terminals are sold in minimum quantities of 25 per order.

Key Features

• Partially insulated with yellow polyolefin heat-shrink sleeve for wire entry protection
• Copper contact material for reliable conductivity
• Crimp connection type — no soldering required
• Compatible with 12 to 10 AWG wire sizes
• 1/2-inch stud size fits standard threaded terminal posts
• RoHS compliant construction

Compatibility

Designed as an OEM-style replacement or general-use ring terminal for crimp tool applications on 12 to 10 AWG conductors terminating to 1/2-inch stud hardware.

Installation Notes

Installation should be performed by a licensed electrician in accordance with applicable NEC requirements. De-energize and lock out the circuit before terminating any conductors. Use a properly sized ratcheting crimp tool rated for insulated or non-insulated ring terminals to ensure a full, secure crimp on the barrel. Do not over-strip the wire insulation beyond the barrel length, and verify the stud size matches the terminal ring before fastening.