Value Collection BDNA-9364 Nbr O-ring 24x30x3 in

Product Description

The VALUE COLLECTION BDNA-9364 is a large-diameter nitrile butadiene rubber (NBR) o-ring used to create reliable static or dynamic seals in fluid and pneumatic systems. With a 24-inch inside diameter, 30-inch outside diameter, and 3-inch cross-section thickness, this o-ring is sized for heavy industrial applications where standard small-bore seals are not sufficient. The round cross-section profile seats evenly in standard o-ring grooves. NBR compound provides good resistance to petroleum-based oils, hydraulic fluids, and fuels, making it a common choice for plumbing, industrial machinery, and fluid-handling equipment.

This o-ring is suited for large-bore sealing applications in industrial and commercial environments, including pump housings, valve bodies, tank covers, and pipe flanges where a high-integrity compression seal is required. Plumbers, pipefitters, millwrights, and industrial maintenance technicians typically install seals of this type. The NBR material performs across a broad service temperature range, making it appropriate for both ambient and moderately elevated temperature fluid systems.

Key Features

• 24-inch inside diameter for large-bore sealing applications
• 30-inch outside diameter with 3-inch cross-section thickness
• Nitrile butadiene rubber (NBR) construction resists petroleum-based oils and hydraulic fluids
• Round cross-section profile for consistent groove seating and uniform compression
• Metric-dimensioned part suitable for metric groove standards

Compatibility

Designed for use as a static or dynamic seal in large-bore o-ring grooves sized to accommodate a 24-inch inside diameter and 3-inch cross-section thickness. Confirm groove dimensions against application requirements before installation.

Installation Notes

Installation should be performed by a qualified pipefitter, plumber, or industrial maintenance technician. Depressurize and drain the system completely before removing the existing seal and installing the replacement. Lubricate the o-ring with a compatible fluid or grease prior to seating to reduce the risk of tearing or rolling during assembly. Verify that the groove surface is clean and free of nicks or burrs that could compromise the seal.