Value Collection BDNA--2952-1 Standard Link Chain Grade 30

Product Description

The VALUE COLLECTION BDNA--2952-1 is a Grade 30 welded standard link chain rated at 2,650 pounds working load capacity. Constructed from zinc-plated steel, this chain resists corrosion in light-duty outdoor and industrial environments. At 43 feet in length with a 3/8-inch stock diameter, it suits towing, logging, load binding, and general-purpose tie-down applications. Each link is welded for consistent strength across the full chain length. Installers and tradespeople working in construction, landscaping, agriculture, and industrial maintenance will find this chain suitable for non-overhead lifting and general securing tasks.

This welded standard link chain is intended for general-purpose applications where a Grade 30 proof coil specification is appropriate. Common uses include trailer safety chains, load securement, tow chains, and site rigging where overhead lifting is not required. The zinc-plated finish adds a layer of corrosion resistance for storage and outdoor exposure. At 43 feet, the chain provides ample length for most field-cutting or custom-length applications.

Key Features

• Grade 30 proof coil construction rated at 2,650 pounds working load capacity
• 3/8-inch stock diameter welded standard links throughout
• 43-foot overall length allows field cutting to required lengths
• Zinc-plated finish provides corrosion resistance for outdoor and storage use
• Inside link width of 0.57 inches and inside link length of 1.33 inches for standard hardware compatibility
• Not rated for overhead lifting — suitable for towing, binding, and general securement

Compatibility

Designed as a general-purpose Grade 30 proof coil chain compatible with standard 3/8-inch chain hardware including hooks, grab hooks, slip hooks, and shackles rated for Grade 30 chain stock.

Installation Notes

This chain should be installed and handled by qualified personnel familiar with load securement standards and applicable regulations such as DOT tie-down requirements for cargo chains. Before use, inspect each weld and link for cracks, deformation, or corrosion. Do not use this Grade 30 chain for overhead lifting — consult Grade 80 or Grade 100 chain for overhead rigging. Field-cut ends should be deburred and inspected before attaching hardware.