Value Collection BD3265 Mounted Flap Wheel 180 Grit

Product Description

The VALUE COLLECTION BD3265 is a mounted flap wheel abrasive designed for deburring, blending, and finishing on metal and other hard surfaces. Constructed with aluminum oxide coated abrasive, this wheel delivers consistent stock removal and surface conditioning across its 1-1/2 inch diameter and 1 inch face width. It mounts on a 1/4 inch shank for use in die grinders, rotary tools, and drill presses. Rated for a maximum of 30,000 RPM, the BD3265 operates at very fine 180 grit, making it suited for final-pass blending and light surface prep where surface finish quality matters. Machinists, fabricators, and maintenance technicians routinely use mounted flap wheels for contoured and hard-to-reach surfaces.

This mounted flap wheel is well suited for light finishing work in fabrication shops, tool and die operations, and general maintenance environments. The 1 inch face width provides solid contact area on flat and contoured workpieces, while the 1-1/2 inch diameter keeps the tool maneuverable in tight areas. At 180 grit very fine grade, it is appropriate for final blending passes after coarser grinding stages or for light oxide and scale removal where minimal material removal is needed.

Key Features

• 180 grit very fine aluminum oxide coated abrasive for final-pass finishing and blending
• 1-1/2 inch outside diameter and 1 inch face width for good contact on contoured surfaces
• 1/4 inch shank mount compatible with standard die grinders and rotary tools
• Rated to 30,000 maximum RPM for use with high-speed rotary equipment
• No interleaf construction for direct abrasive contact and consistent scratch pattern
• Lightweight at 0.01 pounds for extended use without operator fatigue

Compatibility

Designed as a standard 1/4 inch shank mounted flap wheel for use with die grinders, rotary tools, and drill presses that accept 1/4 inch shank accessories.

Installation Notes

Mounted flap wheels are installed and serviced by machinists, fabricators, and maintenance technicians. Before mounting, confirm the tool spindle speed does not exceed the 30,000 RPM rating of this wheel. Secure the 1/4 inch shank fully in the collet or chuck before operation. Always wear appropriate eye protection and follow ANSI B11 or applicable shop safety standards when operating grinding and abrasive equipment.