Value Collection BD-C562428 O-ring Dash 341 Viton 5-pack

Product Description

The VALUE COLLECTION BD-C562428 is a Viton O-ring with a round cross section, sized at 3-5/8 inches inside diameter, 4 inches outside diameter, and 3/16 inches thick. It carries a Dash 341 designation and is molded from Viton (fluoroelastomer) compound with a Shore A durometer rating of 75. This sealing component is used to prevent fluid or gas leakage at static or dynamic joint interfaces. HVAC technicians, plumbers, and industrial mechanics install this type of O-ring in equipment where chemical resistance and elevated temperature performance are required. Sold in a pack of 5.

This O-ring is suited for use in refrigeration systems, hydraulic assemblies, chemical fluid handling equipment, and industrial plumbing connections where standard Buna-N compounds are not chemically compatible. The Viton material provides resistance to petroleum-based fluids, fuels, synthetic lubricants, and many acids, making it a common choice in commercial HVAC and process-industry applications. The Dash 341 designation is a standard AS568 sizing reference used across a wide range of fluid system components.

Key Features

• Viton (fluoroelastomer) construction for broad chemical and heat resistance
• Shore A durometer of 75 provides firm sealing compression with controlled deformation
• Round cross section for consistent seating in standard O-ring grooves
• Dash 341 sizing per AS568 standard for straightforward cross-reference and replacement
• Sold in a pack of 5 units per order

Compatibility

Designed as a standard AS568 Dash 341 replacement O-ring for static or dynamic sealing applications requiring a 3-5/8 inches ID by 4 inches OD by 3/16 inches thick Viton seal.

Installation Notes

O-ring installation should be performed by a qualified technician following equipment manufacturer procedures. Always depressurize and drain the system before replacing seals. Inspect the O-ring groove for damage or debris before seating the new ring, and apply a compatible lubricant to ease installation and reduce the risk of tearing. Do not overstretch the O-ring during installation.