Value Collection BD--18612-1/4 Ring Terminal 12-10 Awg

Product Description

The VALUE COLLECTION BD--18612-1/4 is a non-insulated, D-shaped ring terminal designed for crimp-style electrical connections on 12 to 10 AWG copper wire. The terminal features a copper contact body with a TiN (titanium nitride) plating for corrosion resistance and reliable conductivity. The 1/4-inch stud hole fits standard fastener hardware commonly found in electrical panels, control wiring, and equipment terminations. Electricians and electrical contractors install these terminals using a ratchet or hex crimp tool to achieve a secure, gas-tight mechanical connection. Each terminal meets CSA and UL listing requirements, making them appropriate for use in code-governed electrical work.

These ring terminals are used in residential, commercial, and light industrial wiring applications where a permanent, non-insulated crimp lug is required. Typical installations include panel wiring, motor lead terminations, grounding connections, and control board hookups. The yellow color coding on this terminal series corresponds to the 12 to 10 AWG wire range, helping technicians quickly identify the correct terminal during assembly and inspection. Sold in packages of 25, they suit service calls, panel builds, and production wiring tasks alike.

Key Features

• D-shaped ring terminal with 1/4-inch stud hole for standard fastener hardware
• Accepts 12 to 10 AWG wire via crimp connection
• Copper contact material with TiN plating for conductivity and corrosion resistance
• Non-insulated design for applications where post-crimp insulation or heat shrink is applied separately
• Yellow color coding identifies 12 to 10 AWG wire range at a glance
• CSA Certified and UL Listed for use in code-compliant electrical installations

Compatibility

Designed as a standard non-insulated crimp ring terminal suitable for 12 to 10 AWG conductors requiring a 1/4-inch stud termination in electrical panel, control, and equipment wiring applications.

Installation Notes

Installation should be performed by a qualified electrician in accordance with the NEC and applicable local codes. De-energize and lock out the circuit before terminating any conductors. Use a calibrated ratchet crimp tool rated for non-insulated terminals in the 10 to 12 AWG range to ensure a proper mechanical and electrical connection. Do not use pliers or non-rated tools as a substitute for a proper crimping tool, as an inadequate crimp can result in high-resistance connections or terminal pullout.