Value Collection 8X1X3 Flap 7A V Flap Wheel 220 Grit

Product Description

The VALUE COLLECTION 8X1X3 FLAP 7A V is a nonwoven aluminum oxide unmounted flap wheel designed for surface finishing, blending, and deburring applications. With a very fine 220 grit rating and a flap density of 7, this wheel delivers consistent scratch patterns on metal, wood, and composite surfaces. It measures 8 inches in outside diameter with a 1-inch face width and a 3-inch center hole for arbor mounting. The wheel is rated for a maximum speed of 3,200 RPM. It is sold individually and suited for use by machinists, fabricators, and tool room technicians who require controlled, fine-grade surface finishing.

This flap wheel is intended for bench-mounted or pedestal grinder setups where arbor-mounted nonwoven wheels are used for light stock removal, surface conditioning, and pre-polish blending. Its nonwoven construction allows the wheel to conform slightly to irregular surfaces, making it appropriate for finishing contoured or cylindrical workpieces. The 220 grit designation places this wheel in very fine territory, suited to final-pass finishing rather than aggressive material removal. Typical applications include deburring machined parts, blending weld seams, and refining surface texture prior to coating or plating.

Key Features

• Nonwoven aluminum oxide construction for consistent, uniform surface finishing
• 220 grit very fine grade for final-pass blending and pre-polish work
• 8-inch outside diameter with 3-inch center hole for standard arbor mounting
• Flap density of 7 for controlled cut rate and extended wheel life
• 3,200 RPM maximum speed rating for safe bench or pedestal grinder operation
• No interleaf construction for direct contact finishing

Compatibility

Designed for use on bench-mounted or pedestal grinders and arbor-driven spindles accepting a 3-inch center hole unmounted flap wheel.

Installation Notes

Installation should be performed by a qualified machinist or fabricator familiar with abrasive wheel mounting procedures. Always power down and lock out the grinder before mounting or removing the wheel. Verify that the machine spindle speed does not exceed the 3,200 RPM maximum rating marked for this wheel. Inspect the wheel for damage before each use and follow ANSI B7.1 safety standards for abrasive wheel mounting and guarding.