Value Collection 86316122 D2 Tool Steel Flat Stock

Product Description

The VALUE COLLECTION 86316122 is a D2 tool steel flat stock bar measuring 18 inches in overall length, 1-1/4 inches in overall width, and 1/4 inch in thickness. D2 is a high-carbon, high-chromium cold-work tool steel known for its excellent wear resistance and dimensional stability after heat treatment. This flat stock is supplied in an annealed or pre-hardened condition suitable for further machining and finishing by toolmakers, die makers, and machinists. The piece weighs approximately 1.6 pounds. Tolerances are held to tight industrial standards, making this bar appropriate for precision tooling applications where dimensional accuracy is critical.

D2 flat stock of this size is commonly used in the fabrication of cutting tools, blanking dies, punches, forming dies, and wear plates. It is well suited for both short-run and production tooling in machine shops, tool-and-die shops, and maintenance repair operations. This single-piece bar can be cut, ground, or EDM-machined to final shape. It is appropriate for applications requiring high abrasion resistance combined with moderate toughness. Licensed machinists and toolmakers are the primary end users for this material.

Key Features

• D2 tool steel construction for high wear resistance and dimensional stability
• Length tolerance: plus 0.062 inches
• Width tolerance: plus 0.010 to 0.015 inches
• Thickness tolerance: plus 0.010 to 0.015 inches
• Square tolerance: 0.010 to 0.015 inches
• Single-piece quantity — ready for immediate machining or tooling use

Compatibility

Designed as a general-purpose D2 tool steel flat stock bar for use in die making, punch fabrication, and wear-resistant tooling applications across standard machine shop and tool-and-die operations.

Installation Notes

D2 tool steel flat stock is worked by qualified machinists and toolmakers using conventional milling, grinding, or EDM equipment. Always follow proper machine guarding and PPE protocols when cutting or grinding tool steel. Heat treatment, if required, should be performed by a qualified heat-treat facility following established D2 processing parameters. Secure the workpiece firmly before machining to prevent movement during cutting operations.