Value Collection 837-073 Pvc Reducer Bushing Sch 80

Product Description

The VALUE COLLECTION 837-073 is a Schedule 80 PVC reducer bushing designed to transition a 1/2-inch pipe connection down to a 3/8-inch fitting in pressurized plumbing systems. End connections are spigot by socket, allowing the bushing to insert into a standard socket fitting on one end and accept a socket fitting on the other. At 0.01 pounds, this is a compact, lightweight component suited for tight spaces. Schedule 80 wall thickness provides greater pressure tolerance than Schedule 40, making it appropriate for industrial and commercial plumbing runs where higher working pressures are present. Licensed plumbers and pipefitters are the typical installers for this type of fitting.

This reducer bushing is used in residential, commercial, and industrial PVC piping systems where a pipe or fitting change from 1/2 inch to 3/8 inch is required. Common install scenarios include process piping, irrigation sub-lines, chemical distribution systems, and low-pressure water supply branch lines. The spigot by socket end configuration integrates directly into standard PVC piping assemblies without adapters.

Key Features

• Schedule 80 PVC construction for elevated pressure applications
• Spigot x Socket end connections for direct integration with standard PVC fittings
• Reduces from 1/2 inch to 3/8 inch in a single compact fitting
• Lightweight at 0.01 pounds — minimal load on supporting structure
• PVC material resists corrosion and many common chemicals

Compatibility

Designed as an OEM-style replacement or new-installation component for Schedule 80 PVC piping systems using 1/2-inch to 3/8-inch spigot-by-socket reducer fittings.

Installation Notes

Installation should be performed by a licensed plumber or qualified pipefitter in accordance with applicable IPC and local plumbing codes. Depressurize and drain the affected piping section completely before removing any existing fittings. Use appropriate PVC primer and solvent cement rated for Schedule 80 fittings when making solvent-weld connections. Do not apply excessive force during assembly, as Schedule 80 PVC, while robust, can crack if overtightened or misaligned.