Value Collection 836240PS M24 Split Lock Washer 18-8 Stainless

Product Description

The VALUE COLLECTION 836240PS is a metric split lock washer engineered for M24 fastener applications. Manufactured from 18-8 austenitic stainless steel classified as Grade A2, this washer delivers corrosion resistance suitable for harsh or moisture-prone environments. The split ring design bites into mating surfaces under load, resisting fastener back-off caused by vibration or thermal cycling. With an inside diameter range of 24.5 to 25.5mm and a maximum outside diameter of 40mm, the washer seats correctly under standard M24 hex bolt heads and nuts. Overall thickness is 5mm. Trade installers and maintenance professionals working in corrosive or wet environments commonly select Grade A2 stainless hardware for its combination of strength and oxidation resistance.

This split lock washer is intended for use with M24 metric screws and bolts in structural, mechanical, and industrial fastening applications. It is appropriate wherever vibration resistance is required alongside corrosion-resistant hardware. The metric sizing and DIN 127 standard compliance make it well suited for European-spec equipment, process piping assemblies, mechanical supports, and commercial or industrial equipment installations. Minimum order quantity is 5 pieces per order.

Key Features

• 18-8 austenitic stainless steel construction, Grade A2, for corrosion and oxidation resistance
• Split ring design provides mechanical locking action against vibration-induced loosening
• Conforms to DIN 127 fastener standard for metric hardware compatibility
• Inside diameter range 24.5 to 25.5mm fits M24 fasteners accurately
• 5mm thickness provides consistent spring load under bolt head or nut
• Does not meet military specifications — intended for commercial and industrial use

Compatibility

Designed for use with M24 metric screws and bolts conforming to standard metric fastener dimensions. Complies with DIN 127 split lock washer specifications.

Installation Notes

Installation is performed by maintenance technicians, millwrights, pipefitters, or other trade professionals working with metric fastener systems. Always de-energize or isolate the assembly before disassembling fastened joints. Place the washer between the fastener head or nut and the mating surface with the split gap oriented correctly to allow the washer to seat flat when fully torqued. Do not reuse heavily deformed or flattened lock washers, as spring effectiveness is reduced after permanent deformation.