Value Collection 809-XF Surface Grinding Wheel 240 Grit

Product Description

The Value Collection 809-XF is an aluminum oxide surface grinding wheel designed for precision stock removal and finish grinding on ferrous and non-ferrous metals. At 8 inches in diameter and 1 inch thick with a 1/2 inch arbor hole, this wheel fits standard surface grinders used in machine shops and fabrication environments. The 240 grit, very fine grade abrasive delivers smooth surface finishes on hardened steels, tool steels, and similar workpieces. Rated at 2600 RPM maximum operating speed, the 809-XF is suited for low-speed surface grinding applications where tight tolerances and refined surface quality are the priority. Licensed machinists, tool and die makers, and skilled tradespeople are the typical users.

This wheel is intended for use on horizontal-spindle reciprocating-table surface grinders found in production machine shops, maintenance departments, and toolroom settings. It is a straight-wheel profile appropriate for flat surface grinding passes. The very fine 240 grit makes it well suited for finish passes, deburring hardened parts, and light material removal where surface finish quality matters more than aggressive stock removal rate. It is not intended for cutoff or cylindrical grinding applications.

Key Features

• 240 grit very fine grade aluminum oxide abrasive for smooth, controlled surface finishes
• 8 inches diameter x 1 inch thick straight-wheel profile fits standard surface grinder spindles
• 1/2 inch arbor hole for secure, centered mounting on compatible spindle hardware
• 2600 RPM maximum rated speed for safe operation on low-speed surface grinders
• Blue wheel color for quick grit and grade identification at a glance

Compatibility

Designed as an OEM-style replacement or direct-fit consumable for horizontal-spindle surface grinders accepting an 8 inch diameter straight grinding wheel with a 1/2 inch arbor hole.

Installation Notes

Surface grinding wheels must be installed by a qualified operator following ANSI B7.1 safe use standards and the machine manufacturer guidelines. Always ring-test the wheel for cracks before mounting and never exceed the 2600 RPM maximum speed marked on the wheel. Power down and lock out the grinder before changing wheels, and ensure the wheel flanges and blotters are clean and properly seated before tightening. Always dress the wheel with an appropriate dressing tool before the first grinding pass.