Value Collection 80122435 Internal Snap Ring 2-1/8 in 5 Pack

Product Description

The VALUE COLLECTION 80122435 is a spring steel internal snap retaining ring designed to seat in a machined groove inside a bore to secure components axially. With a 2-1/8 inch nominal bore diameter and a 2.35 inch free outer diameter, this ring is sized for precision fitment in standard housing bores. The ring measures 0.078 inches thick and requires a groove width of 0.086 inches and a groove depth of 0.063 inches. A phosphate finish provides baseline corrosion resistance. Machinists, maintenance technicians, and trade mechanics install these rings in bearing housings, hydraulic cylinders, gearboxes, and mechanical assemblies across HVAC, plumbing, and industrial equipment applications.

Internal snap retaining rings in this size range are common in residential and light commercial mechanical equipment. Typical applications include securing bearings, bushings, pins, and shafts inside bored housings where a removable but positive axial stop is required. This part ships in a package quantity of five, making it practical for service shops that replace rings during equipment rebuilds or preventive maintenance. The phosphate-coated spring steel construction is appropriate for moderate-load, indoor mechanical environments.

Key Features

• 2-1/8 inch nominal bore diameter for precise groove fitment
• 2.35 inch free outer diameter for controlled installation snap
• Spring steel construction provides reliable retention force and repeated removal capability
• Phosphate finish for baseline corrosion and wear resistance
• 0.086 inch groove width with groove width tolerance of 0.000 to 0.005 inches
• Package quantity of 5 units per order

Compatibility

Designed as an OEM-style replacement internal snap retaining ring for any bore measuring 2-1/8 inches nominal diameter with a groove width of 0.086 inches and groove depth of 0.063 inches.

Installation Notes

Internal snap rings require snap ring pliers sized for internal rings — always use the correct tip size to avoid ring distortion or ejection during installation. Power down and de-energize all equipment before disassembling housings or bearing carriers. Verify groove dimensions against the ring specifications before installation to ensure proper seating and retention. Worn or oversized grooves will not retain the ring safely and the groove should be inspected or the housing replaced before service is completed.