Value Collection 801034-99990 Abrasive Belt Disc Cleaner

Product Description

The VALUE COLLECTION 801034-99990 is a vulcanized rubber abrasive cleaner designed to restore cutting performance on abrasive belts and discs. Measuring 8.5 inches long by 1.375 inches wide by 1.375 inches thick, the block is pressed against a running abrasive surface to dislodge embedded swarf, dust, and loading from the abrasive grain. Compatible with grit ratings from 24 through 200, it covers the full range from coarse stock-removal belts to finer finishing grits. The block weighs 0.6 pounds, making it easy to handle at the machine. Machinists, woodworkers, metal fabricators, and shop technicians use this type of cleaner to extend abrasive life and maintain consistent cut rate.

This cleaner is suited for use in production grinding, sanding, and finishing operations where abrasive belts or discs accumulate loading from wood resins, metal fines, or soft materials. It is applied by holding the block lightly against the moving abrasive with the machine running at normal operating speed. The open structure of the rubber compound grabs and pulls embedded debris out of the abrasive surface, restoring the exposed grit without removing or damaging the abrasive itself. Shops running high-volume belt sander operations will see the most consistent benefit.

Key Features

• Compatible with 24 to 200 grit abrasive belts and discs, covering coarse through fine ranges
• Dimensions of 8.5 inches x 1.375 inches x 1.375 inches provide a comfortable grip and broad contact surface
• Lightweight at 0.6 pounds for easy one-handed use at the machine
• Restores abrasive cut rate by removing loaded swarf, resin, and dust from belt or disc surface
• Extends usable abrasive life, reducing frequency of belt and disc changes

Compatibility

Designed for use on abrasive belts and discs with grit ratings from 24 to 200, including coarse metal-grinding belts and finer woodworking finishing belts.

Installation Notes

This cleaner is a consumable tool, not an installed component. Power down the belt or disc machine completely before inspecting or changing abrasives. When using the cleaner block, keep the machine running at its standard operating speed and apply light, even pressure to the moving abrasive surface. Do not force or jam the block against the abrasive, as excessive pressure can cause the block to grab suddenly.