Value Collection 720-3001 Square End Mill 7/64 in Hss

Product Description

The VALUE COLLECTION 720-3001 is a 4-flute, single-end square end mill manufactured from M2 high speed steel. Designed for milling flat-bottomed slots, shoulders, and profiles, it features a 30-degree spiral helix and a bright uncoated finish. The cutting diameter is 0.1094 inches (7/64 inch), with a 0.375-inch length of cut and a 0.375-inch shank diameter. Right-hand cut and right-hand flute geometry make it compatible with standard vertical milling machines and machining centers. It is installed and operated by machinists and tool-and-die professionals in job shop and production environments.

This end mill is suited for milling ferrous and non-ferrous materials in light-to-moderate material removal applications. The regular-length body and 2.3125-inch overall length provide good rigidity for close-tolerance slotting and peripheral milling. The uncoated M2 HSS construction makes it a practical choice where re-sharpening is preferred over coated carbide tooling, and the 3/8-inch shank fits standard collets and end mill holders found on most vertical mills and CNC milling centers.

Key Features

• M2 high speed steel construction for toughness and re-sharpenability
• 4-flute geometry for improved surface finish on finishing passes
• 30-degree helix angle promotes efficient chip evacuation
• Bright uncoated finish suitable for a wide range of workpiece materials
• Right-hand cut and right-hand spiral flute — compatible with standard milling spindles
• Single-end design; non-centercutting — not intended for plunge cuts

Compatibility

Designed as an OEM-style replacement or standard tooling option for 3/8-inch collets and end mill holders on vertical milling machines and CNC machining centers using fractional-inch tooling systems.

Installation Notes

Installation is performed by a qualified machinist. Ensure the spindle is fully powered down and locked out before inserting or removing the end mill from the holder. Secure the shank fully within the collet or end mill holder to the manufacturer-specified engagement depth to prevent pullout under load. This tool is non-centercutting and should not be used for direct plunge milling operations.