Value Collection 6BN1/2X12 Ss Pipe Nipple Sch 40 Npt

Product Description

The VALUE COLLECTION 6BN1/2X12 is a stainless steel pipe nipple manufactured to Schedule 40 wall thickness with NPT (National Pipe Taper) threading on both ends. Measuring 0.84 inches in outer diameter and 12 inches in length, it serves as a threaded connector between pipe sections, valves, fittings, or equipment in fluid and gas piping systems. The Schedule 40 wall provides reliable pressure-rated performance suitable for demanding plumbing, HVAC, and industrial process applications. Licensed plumbers and pipefitters install this type of nipple when extending runs, making up close-nipple connections, or tying into existing threaded iron or stainless systems. At 0.4 pounds, it is easy to handle during installation.

This nipple is suited for use in residential and commercial plumbing, hydronic heating, steam systems, compressed air lines, and light industrial process piping where corrosion resistance is required. Stainless steel construction makes it appropriate for wet, corrosive, or sanitary environments where carbon steel or galvanized fittings are not acceptable. NPT threading ensures compatibility with standard threaded pipe fittings and valves across these application types.

Key Features

• Schedule 40 wall thickness for pressure-rated service in plumbing and HVAC piping
• NPT threads on both ends for standard threaded pipe system compatibility
• Stainless steel construction resists corrosion in wet and chemically active environments
• 12-inch length suits extension runs and close-clearance connections
• 0.84-inch outer diameter consistent with nominal 1/2-inch pipe sizing
• Lightweight at 0.4 pounds for easy single-hand installation

Compatibility

Designed as an OEM-style replacement or new-installation fitting for standard NPT Schedule 40 threaded pipe systems using nominal 1/2-inch pipe.

Installation Notes

Installation should be performed by a licensed plumber or pipefitter in accordance with applicable IPC or local mechanical code requirements. Shut off and depressurize the affected piping system completely before removing or installing any threaded fitting. Apply a listed thread sealant or PTFE tape to the male NPT threads before making up the joint, and tighten to a wrench-tight fit without over-torquing, which can crack fittings or distort threads. Pressure-test the system per code after completing the connection.